DAVIS Tripod Kit Uživatelský manuál

1Mounting Tripod KitInstallation ManualFor use with Davis’s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installa

Tripod Assembly2Tools for Setup• Adjustable wrench• Compass or local area map• Drill with 3/16" or 13/64" (5 mm) bit for the 1/4" lag s

Mounting the Tripod38. Attach the foot bracket to the tripod leg as shown.Apply pitch pads to the bottom of the foot bracket and the two foot brackets

Mounting the Tripod4For more information, contact your local lightning protection authority and/or refer to the following articles: • MIL-HDBK-419A: G

Mounting the Tripod5When both sides of the ISS are mounted together with the anemometer arm pointing north, the solar panel on the rain collector side

Securing the ISS on the Tripod64. Tighten the hex nuts using an adjustable wrench or 7/16" wrench. 5. Re-attach the rain collector cone. 6. Set t

Attaching a Complete System Shelter7Attaching a Complete System ShelterInstall a complete system shelter or multi-purpose shelter the same way you wou

Product Number: #7716Davis Instruments Part Number: 7395.299Mounting Tripod Kit Installation ManualRev. G Manual (12/10/08)This product complies with